Call (602) 277-7208
Monthly Specials


BevGuard Water Filters


Save Up To 45% Today!
Upgrade To BevGuard
Replace The Old Technology
EverPure and Cuno Filters

Call 602-277-7208 NOW!
Sign Up For Specials
Want to hear more about our specials? Sign up for our newsletter below.
  

BGC-3100S

ADVANCED FILTRATION TECHNOLOGY

This BevGuard™ brand water filter contains a polyphosphate scale inhibitor and a graded density spun bonded polypropylene filtration cartridge. The scale inhibitor reduces the accumulation of minerals that lead to hard water spots from lime scale build up on equipment. The polypropylene block provides tremendous capacity to remove and/or reduce sediment that may be present in your drinking water. These processes ensure that you are getting the cleanest water possible.

This economical filter will provide you with months of protection by reducing hard water build up in any beverage or food equipment application.

REPLACES:

  • M™/Cuno® CFS 8110-ELS 55720-07

FILTER FEATURES:

  • Economical alternative to expensive filter substitutes
  • Delivers clean water as it reduces sediment
  • Significantly reduces hardness build up due to minerals present in the water supply
  • Designed to provide up to twelve months of life
  •  Does not remove minerals which may be beneficial to health

This filter should not be used with water that is microbiologically unsafe or of unknown quality, without adequate disinfection before and/or after the filter.

BevGuard™ filters have been tested by the manufacturer against ANSI/NSF Standard 42 for material requirements only.

Brochure

Spec Sheet

Installation Instructions    

 

Micron Rating:

5 micron

Dimensions:

15 1/2" x 3 3/16" (39.37cm x 8.1 cm)

Min Operating Pressure:

25 psi (1.7 bar)

Max Operating Pressure:

125 psi - (8.6 bar)

Operating Temperature:

35-100°F (1.7°C - 38°C)

Flow Rate:

1.67 gpm/6.32 lpm

Life:

12 months